Stainless Steel Five-Layer Sintered Mesh Sintered Filter Rod Metal
Filter Mesh
Sintered metal filter mesh basic introduction
The stainless steel sintered mesh filter is a new type of filter
material with high strength and overall rigidity, which is made of
a multilayer metal sintered mesh, which is made of a multi-layer
stainless steel mesh through a special laminated layer, and is
sintered in a vacuum. The meshes of the wire mesh are interlaced to
form a uniform and ideal filtering structure.
Sintered metal filter mesh specifications
| Product name | Stainless Steel Five-Layer Sintered Mesh Sintered Filter Rod Metal
Filter Mesh |
| Type | Signle layer without edges Single layer with edged Multi layer filter disc with edge Dutch weave filter disc Spot welded with closed selvaged type Spot welded without closed selvaged type Sintered mesh filter disc Black wire cloth disc |
| Material | 201 304 304L 316 316L430 etc |
| Weave type | Plain weave,twilled weave,plain dutch weave,twilled dutch
weave,reverse dutch weave |
| Wire diameter | 0.025mm--2.5mm |
| Thickness | 1.0mm---5.0mm |
| Filter rate | 1--200micron |
| Layers | Single layer or multi layers |
| Shapes | Rectangle,square,round,oval,circular,cap,waist |
| Usages | 1. Solid/gas separation,muffler,silencer,air purification 2. Filtering oil dedusting,isolation,dust,dustproof 3. Gas-oil dissociation,gas liquid separation 4. Moistureproof,heat insulation 5. Uniform gas,well-distributed,diffuse gas or oil or heat 6. Pharmaceutical,Chemical filber 7. Filtration for high temperature environment 8. High pressure reverse wash filtering 9. Acid and alkali corrosion environment filtering |
Sintered metal filter mesh characteristic
The material used to produce these filters is 316L stainless
steel.They are made by uniaxial compaction of powder in a rigid
tool with the negative shape of the part,and then sintered.The pore
size is adjusted by changing the compaction pressure and the
particle size of the powder.
1) High strength: After the five-layer wire mesh is sintered, it
has extremely high mechanical strength and compressive strength;
2) High precision: uniform surface filtration performance can be
exerted for the filtration particle size of 1-300um;
3) Heat resistance: can be used for continuous filtration from -200
degrees to up to 650 degrees;
4) Cleanability: countercurrent cleaning surface filter structure
can be used, and cleaning is simple.
5) It has good permeability, high strength, no need to add support
structure, no material falling off, strong corrosion resistance,
easy to clean, and not easy to damage. Standard material: SUS316L.
Sintered metal filter mesh main purpose
1) Used as a dispersive cooling material in high temperature
environment;
2) For gas distribution, liquidized bed orifice material;
3) Used for high-precision, high-reliability and high-temperature
filter materials;
4) Used for high pressure backwash oil filter
5) Used for filtration of polyester, oil, food and beverage,
chemical and chemical fiber products, and also for filtration of
water treatment and gas.
